Putters | Men's Golf Clubs

AI design ensures consistent ball speed and ideal topspin.
Achieved with the mysterious steel revived after 13 years.
■A mysterious metal originating in ancient India, characterized by its unique insert pattern: The "DAMASCUS MILLED Putter" is a model that uses Damascus steel, a material that combines beauty and functionality and is used in high-end knives and cutlery, as the insert material. The unique and beautiful wood grain pattern that emerges on the surface creates a different look for each putter. Along with the intricate milling marks visible in various parts of the head, it creates a luxurious presence.
■The back of the face features a complex shape designed by AI: The insert has a complex and precise shape created by AI design. The aim is to ensure that ball speed does not vary greatly no matter where you hit the ball, and that it also generates ideal forward spin. By achieving stable distance and direction, it greatly increases the chances of sinking the putt.
■An insert that not only provides stable ball speed but also generates more forward spin: The DAMASCUS insert not only offers the same performance as the Ai-ONE insert, which provides stable ball speed no matter where you hit the ball, but it was also developed by AI with a focus on the forward spin (upward rotation) that is imparted to the ball. It is designed to provide stable forward spin (upward rotation) regardless of where you hit the ball, whether on the upper or lower part of the face. In addition, because the lower part of the insert is connected to the sole, the insert's effect can be fully utilized even on the lower part of the face.
■The lineup consists of a total of six models. For players who seek the latest technology along with the solid, high-quality feel unique to metal, this is the perfect series.

AI design ensures consistent ball speed and ideal topspin.
Achieved with the mysterious steel revived after 13 years.
■A mysterious metal originating in ancient India, characterized by its unique insert pattern: The "DAMASCUS MILLED Putter" is a model that uses Damascus steel, a material that combines beauty and functionality and is used in high-end knives and cutlery, as the insert material. The unique and beautiful wood grain pattern that emerges on the surface creates a different look for each putter. Along with the intricate milling marks visible in various parts of the head, it creates a luxurious presence.
■The back of the face features a complex shape designed by AI: The insert has a complex and precise shape created by AI design. The aim is to ensure that ball speed does not vary greatly no matter where you hit the ball, and that it also generates ideal forward spin. By achieving stable distance and direction, it greatly increases the chances of sinking the putt.
■An insert that not only provides stable ball speed but also generates more forward spin: The DAMASCUS insert not only offers the same performance as the Ai-ONE insert, which provides stable ball speed no matter where you hit the ball, but it was also developed by AI with a focus on the forward spin (upward rotation) that is imparted to the ball. It is designed to provide stable forward spin (upward rotation) regardless of where you hit the ball, whether on the upper or lower part of the face. In addition, because the lower part of the insert is connected to the sole, the insert's effect can be fully utilized even on the lower part of the face.
■The lineup consists of a total of six models. For players who seek the latest technology along with the solid, high-quality feel unique to metal, this is the perfect series.

AI design ensures consistent ball speed and ideal topspin.
Achieved with the mysterious steel revived after 13 years.
■A mysterious metal originating in ancient India, characterized by its unique insert pattern: The "DAMASCUS MILLED Putter" is a model that uses Damascus steel, a material that combines beauty and functionality and is used in high-end knives and cutlery, as the insert material. The unique and beautiful wood grain pattern that emerges on the surface creates a different look for each putter. Along with the intricate milling marks visible in various parts of the head, it creates a luxurious presence.
■The back of the face features a complex shape designed by AI: The insert has a complex and precise shape created by AI design. The aim is to ensure that ball speed does not vary greatly no matter where you hit the ball, and that it also generates ideal forward spin. By achieving stable distance and direction, it greatly increases the chances of sinking the putt.
■An insert that not only provides stable ball speed but also generates more forward spin: The DAMASCUS insert not only offers the same performance as the Ai-ONE insert, which provides stable ball speed no matter where you hit the ball, but it was also developed by AI with a focus on the forward spin (upward rotation) that is imparted to the ball. It is designed to provide stable forward spin (upward rotation) regardless of where you hit the ball, whether on the upper or lower part of the face. In addition, because the lower part of the insert is connected to the sole, the insert's effect can be fully utilized even on the lower part of the face.
■The lineup consists of a total of six models. For players who seek the latest technology along with the solid, high-quality feel unique to metal, this is the perfect series.

AI design ensures consistent ball speed and ideal topspin.
Achieved with the mysterious steel revived after 13 years.
■A mysterious metal originating in ancient India, characterized by its unique insert pattern: The "DAMASCUS MILLED Putter" is a model that uses Damascus steel, a material that combines beauty and functionality and is used in high-end knives and cutlery, as the insert material. The unique and beautiful wood grain pattern that emerges on the surface creates a different look for each putter. Along with the intricate milling marks visible in various parts of the head, it creates a luxurious presence.
■The back of the face features a complex shape designed by AI: The insert has a complex and precise shape created by AI design. The aim is to ensure that ball speed does not vary greatly no matter where you hit the ball, and that it also generates ideal forward spin. By achieving stable distance and direction, it greatly increases the chances of sinking the putt.
■An insert that not only provides stable ball speed but also generates more forward spin: The DAMASCUS insert not only offers the same performance as the Ai-ONE insert, which provides stable ball speed no matter where you hit the ball, but it was also developed by AI with a focus on the forward spin (upward rotation) that is imparted to the ball. It is designed to provide stable forward spin (upward rotation) regardless of where you hit the ball, whether on the upper or lower part of the face. In addition, because the lower part of the insert is connected to the sole, the insert's effect can be fully utilized even on the lower part of the face.
■The lineup consists of a total of six models. For players who seek the latest technology along with the solid, high-quality feel unique to metal, this is the perfect series.

The result is determined by your gaze.
Even with the correct stance and stroke, mistakes don't decrease. PING has identified the cause as "the gaze before hitting the ball."
EYE-Q, which stabilizes judgment and concentration, enhances the focus of advanced users.
【ALLY BLUE ONSET】
PING's mallet-shaped putter is popular on tour. It features a long sightline, a linear head shape, and a reassuring head size.
■ To bring out high concentration
EYE-Q: A head structure that creates a clear point of focus for the eye through head shape, coloring, dots, and a long sightline. This new technology was developed based on research at PING and data from tour players.
■ Balancing ease of use and peace of mind
Onset: The hosel and shaft axis are positioned behind the face, combining the maneuverability of a blade with the forgiveness of a mallet.
The design allows you to see the entire ball, resulting in a high level of alignment.
Center of gravity position similar to blade type: Because the shaft is inserted closer to the head than the face, it achieves a center of gravity distance and balance similar to that of a blade type putter. In addition to the confidence of a mallet shape, it has a structure that allows for high maneuverability.
The Importance of Torque: To ensure stable face control, PING emphasizes "pulling" rather than "pushing" the center of gravity. By positioning the center of gravity behind the shaft, a stroke that matches natural hand movement becomes possible.
■ Soft feel and high MOI
New PEBAX insert: Made with "PEBAX," a material that combines a comfortable feel with lightweight construction, this putter delivers exceptional roll. It's perfect for golfers who prefer a soft feel but still want a solid roll.
Composite materials: By combining a lightweight aluminum body with a high-density stainless steel sole plate, excess weight is effectively reduced and redistributed to the outer edge of the head. This results in a high MOI and an optimal center of gravity design.
■PING SPST TOUR 1.0P 17 IN WHT/BZ Grip
The longer grip, which is frequently used on the PGA Tour, helps to control wrist movement and achieve a stable stroke. By shortening the grip length of a 17-inch long grip and creating a counterbalanced feel, a smoother clubhead movement and a stable rhythm are produced, improving distance control accuracy.

The result is determined by your gaze.
Even with the correct stance and stroke, mistakes don't decrease. PING has identified the cause as "the gaze before hitting the ball."
EYE-Q, which stabilizes judgment and concentration, enhances the focus of advanced users.
【KETSCH ONSET】
The mallet shape features three sight lines for excellent alignment. The slightly rounded head and size provide both maneuverability and confidence.
■ To bring out high concentration
EYE-Q: A head structure that creates a clear point of focus for the eye through head shape, coloring, dots, and a long sightline. This new technology was developed based on research at PING and data from tour players.
■ Balancing ease of use and peace of mind
Onset: The hosel and shaft axis are positioned behind the face, combining the maneuverability of a blade with the forgiveness of a mallet.
The design allows you to see the entire ball, resulting in a high level of alignment.
Center of gravity position similar to blade type: Because the shaft is inserted closer to the head than the face, it achieves a center of gravity distance and balance similar to that of a blade type putter. In addition to the confidence of a mallet shape, it has a structure that allows for high maneuverability.
The Importance of Torque: To ensure stable face control, PING emphasizes "pulling" rather than "pushing" the center of gravity. By positioning the center of gravity behind the shaft, a stroke that matches natural hand movement becomes possible.
■ Soft feel and high MOI
New PEBAX insert: Made with "PEBAX," a material that combines a comfortable feel with lightweight construction, this putter delivers exceptional roll. It's perfect for golfers who prefer a soft feel but still want a solid roll.
Composite materials: By combining a lightweight aluminum body with a high-density stainless steel sole plate, excess weight is effectively reduced and redistributed to the outer edge of the head. This results in a high MOI and an optimal center of gravity design.

The result is determined by your gaze.
Even with the correct stance and stroke, mistakes don't decrease. PING has identified the cause as "the gaze before hitting the ball."
EYE-Q, which stabilizes judgment and concentration, enhances the focus of advanced users.
【ALLY BLUE ONSET】
PING's mallet-shaped putter is popular on tour. It features a long sightline, a linear head shape, and a reassuring head size.
■ To bring out high concentration
EYE-Q: A head structure that creates a clear point of focus for the eye through head shape, coloring, dots, and a long sightline. This new technology was developed based on research at PING and data from tour players.
■ Balancing ease of use and peace of mind
Onset: The hosel and shaft axis are positioned behind the face, combining the maneuverability of a blade with the forgiveness of a mallet.
The design allows you to see the entire ball, resulting in a high level of alignment.
Center of gravity position similar to blade type: Because the shaft is inserted closer to the head than the face, it achieves a center of gravity distance and balance similar to that of a blade type putter. In addition to the confidence of a mallet shape, it has a structure that allows for high maneuverability.
The Importance of Torque: To ensure stable face control, PING emphasizes "pulling" rather than "pushing" the center of gravity. By positioning the center of gravity behind the shaft, a stroke that matches natural hand movement becomes possible.
■ Soft feel and high MOI
New PEBAX insert: Made with "PEBAX," a material that combines a comfortable feel with lightweight construction, this putter delivers exceptional roll. It's perfect for golfers who prefer a soft feel but still want a solid roll.
Composite materials: By combining a lightweight aluminum body with a high-density stainless steel sole plate, excess weight is effectively reduced and redistributed to the outer edge of the head. This results in a high MOI and an optimal center of gravity design.

A good putter is also essential for scoring well.
Three carefully selected models to enhance your putting experience, from sinking the putt to getting it close to the hole.
【LOUISE】
Highly maneuverable mid-mallet putter: A popular and easy-to-use mid-mallet putter among female golfers. It features a short slant neck to prevent hooks and a rounded, easy-to-address head shape.
[The Magic of the Cup-In]
■Smooth-rolling insert design
Low center of gravity design using composite materials: A low center of gravity is achieved by combining a lightweight aluminum body with a high-density stainless steel plate. This allows for smooth rolling with a high MOI.
PEBAX Insert: Features the "PEBAX insert," which combines a soft feel with high rebound that allows the ball to roll smoothly.
■Specialized grips for female golfers
Featuring a moderately thick, soft-textured grip, it supports your putting stroke. The calming Galactic Lilac color scheme also inspires confidence.

A good putter is also essential for scoring well.
Three carefully selected models to enhance your putting experience, from sinking the putt to getting it close to the hole.
[ANSER 2D]
Combining confidence and ease of use: The low center of gravity design with composite materials makes it forgiving on mishits and ensures a solid roll. It features the "PEBAX insert," which is recognized by many professionals, to assist in putting.
[The Magic of the Cup-In]
■Smooth-rolling insert design
Low center of gravity design using composite materials: A low center of gravity is achieved by combining a lightweight aluminum body with a high-density stainless steel plate. This allows for smooth rolling with a high MOI.
PEBAX Insert: Features the "PEBAX insert," which combines a soft feel with high rebound that allows the ball to roll smoothly.
■Specialized grips for female golfers
Featuring a moderately thick, soft-textured grip, it supports your putting stroke. The calming Galactic Lilac color scheme also inspires confidence.

It's fun because you can control it. It feels good because it resonates in your hands. Introducing the new 'SYSTM2' putter.
■ The 'SYSTM2' putter is perfect for golfers who value control and want to make the most of their own intuition and fine touch.
The "SYSTM2 Bandon TM2 NEW Truss Center" putter combines the versatile, traditional horn-shaped mid-mallet design with the highly stable "Truss Hosel" featuring a triangular truss structure. The body is made of "304 (SS) stainless steel" for a solid feel, and the precision-milled face provides a soft and comfortable impact, delivering consistent, premium performance across all models in the series.
■Designed to refine your stroke.
This model is ideal for golfers who want to maintain a square face while making a straight stroke. Furthermore, the distinctive triangular neck shape of the "NEW Truss Center Hosel" gives it a unique presence that sets it apart from conventional blades.
■ Head shape that makes alignment easy.
The distinctive head shape allows for intuitive alignment by positioning the club around the target. Furthermore, it employs a two-piece construction with a two-tone finish that enhances alignment performance, with a prominent topline. The satin-finish 304SS front section and the black PVD-finished 304SS back section create a beautiful contrast, making it easier to set up accurately at address and supporting correct alignment.

It's fun because you can control it. It feels good because it resonates in your hands. Introducing the new 'SYSTM2' putter.
■ The 'SYSTM2' putter is perfect for golfers who value control and want to make the most of their own intuition and fine touch.
The "SYSTM2 Del Monte TB1 Truss Heel" putter combines a wide-bodied blade shape that achieves a deep center of gravity and high MOI with a distinctive triangular truss structure called the "Truss Hosel." Featuring a solid feel thanks to its "304 (SS) stainless steel" body and a precision-milled face, it delivers a soft and comfortable feel, providing consistent premium performance across all models in the series.
■Designed to refine your stroke.
This model is ideal for in-to-in type golfers who find it easy to stroke in an open-close arc. It features a "truss hosel" with a triangular truss structure that suspends the club head, reducing face misalignment on off-center hits.
■ Combine the beauty of the blade with the weapon of tolerance.
The "Del Monte" is a model that combines the beauty of a traditional blade putter with high forgiveness. It fuses the refined head shape and comfortable feel unique to blade putters with the stability of a mallet putter. Furthermore, it employs a two-piece construction with a two-tone finish that enhances alignment performance by highlighting the top line. The satin-finish 304SS front section and the black PVD-finished 304SS back section create a beautiful contrast, making it easier to set up accurately at address and supporting correct alignment.

It's fun because you can control it. It feels good because it resonates in your hands. Introducing the new 'SYSTM2' putter.
■ The 'SYSTM2' putter is perfect for golfers who value control and want to make the most of their own intuition and fine touch.
The "SYSTM2 Juno TB1 Truss Heel" putter combines a square back bumper, ideal for golfers who prefer sharp edges, with a distinctive triangular truss structure called the "Truss Hosel." Featuring a solid "304 (SS) stainless steel" body and a precision-milled face, it delivers a soft and comfortable feel, providing consistent premium performance across all models in the series.
■Designed to refine your stroke.
This model is ideal for in-to-in type golfers who find it easy to stroke in an open-close arc. It features a "truss hosel" with a triangular truss structure that suspends the club head, reducing face misalignment on off-center hits.
■The two-tone finish provides both visibility and functionality.
Featuring a two-piece construction with a two-tone finish that enhances alignment performance and highlights the top line, the satin-finish 304SS front section and the black PVD-finished 304SS back section create a beautiful contrast, making it easier to set up accurately at address and supporting correct alignment.

It's fun because you can control it. It feels good because it resonates in your hands. Introducing the new 'SYSTM2' putter.
■ The 'SYSTM2' putter is perfect for golfers who value control and want to make the most of their own intuition and fine touch.
The "SYSTM2 Bandon" putter is a versatile, traditional mid-mallet model with a horn-shaped design. Featuring a solid "304 (SS) stainless steel" body and a precision-milled face, it delivers a soft and comfortable feel, providing consistent, premium performance across all models in the series.
■Designed to refine your stroke.
A hosel design that minimizes face rotation and keeps the face square throughout the stroke. This model is suitable for golfers who want to stroke in a straight line while keeping the face square. Half-shaft offset provides a balanced setup and supports a straight stroke motion while keeping the face square.
■ Head shape that makes alignment easy.
The distinctive head shape allows for intuitive alignment by positioning the club around the target. Furthermore, it employs a two-piece construction with a two-tone finish that enhances alignment performance, with a prominent topline. The satin-finish 304SS front section and the black PVD-finished 304SS back section create a beautiful contrast, making it easier to set up accurately at address and supporting correct alignment.

It's fun because you can control it. It feels good because it resonates in your hands. Introducing the new 'SYSTM2' putter.
■ The 'SYSTM2' putter is perfect for golfers who value control and want to make the most of their own intuition and fine touch.
The "SYSTM2 Del Monte" putter features a wide-bodied blade shape that achieves a deep center of gravity and high MOI. The body is made of "304 (SS) stainless steel" for a solid feel, and the precision-milled face creates a soft and comfortable feel, providing consistent, premium performance across all models in the series.
■Designed to refine your stroke.
The wide, rearward-extending blade shape allows for a deep center of gravity, resulting in superior forgiveness. This improves stability even on off-center hits, ensuring consistent performance. The hosel structure, with its 40° toe hang angle, is ideal for in-to-in type golfers who tend to stroke with an open-close arc.
■ Combine the beauty of the blade with the weapon of tolerance.
The "Del Monte" is a model that combines the beauty of a traditional blade putter with high forgiveness. It fuses the refined head shape and comfortable feel unique to blade putters with the stability of a mallet putter. Furthermore, it employs a two-piece construction with a two-tone finish that enhances alignment performance by highlighting the top line. The satin-finish 304SS front section and the black PVD-finished 304SS back section create a beautiful contrast, making it easier to set up accurately at address and supporting correct alignment.

It's fun because you can control it. It feels good because it resonates in your hands. Introducing the new 'SYSTM2' putter.
■ The 'SYSTM2' putter is perfect for golfers who value control and want to make the most of their own intuition and fine touch.
The "SYSTM2 Juno" putter features a square back bumper, ideal for golfers who prefer a sharp edge. It utilizes a solid "304 (SS) stainless steel" body and a precision-milled face to produce a soft and comfortable feel, delivering consistent, premium performance across all models in the series.
■Designed to refine your stroke.
The hosel structure, with its 43° toe hang angle, is optimized for in-to-in type golfers who find it easy to stroke with an open-closed arc. The traditional setup created by the full shaft offset firmly supports smooth face rotation during the stroke.
■The two-tone finish provides both visibility and functionality.
Featuring a two-piece construction with a two-tone finish that enhances alignment performance and highlights the top line, the satin-finish 304SS front section and the black PVD-finished 304SS back section create a beautiful contrast, making it easier to set up accurately at address and supporting correct alignment.

It's fun because you can control it. It feels good because it's within reach. Introducing the new 'SYSTM2' putter.
■ The 'SYSTM2' putter is perfect for golfers who value control and want to make the most of their own intuition and fine touch.
The "SYSTM2 Soto" putter is a classic-shaped model characterized by its smooth, flowing lines and rounded bumper. Featuring a solid "304 (SS) stainless steel" body and a precision-milled face, it delivers a soft and comfortable feel, providing consistent, premium performance across all models in the series.
■Designed to refine your stroke.
The hosel structure, which creates a 43° toe hang angle, is optimized for in-to-in type golfers who tend to stroke with an open arc. The traditional setup created by the full shaft offset firmly supports smooth face rotation during the stroke.
■Two-tone finish combines visibility and functionality
It features a two-piece construction with a two-tone finish that enhances alignment performance through the top line. The satin-finish 304SS front section and the black PVD-finished 304SS back section create a beautiful contrast, making it easier to set up accurately at address and supporting correct alignment.

The Spider series now includes a new "zero torque" putter concept that allows for effortless putting strokes!
■Zero torque is now permitted. "SPIDER ZT" Putter
Eliminate hesitation and deviation. The Spider ZT Long putter, with its zero-torque design, is the longest, heaviest, and highest moment of inertia model in this lineup. Designed to deliver highly repeatable strokes with every putt, it offers unprecedented stability.
■ Further pursuit of the Spider's stability
The combination of a high-density 303 stainless steel front section and a low-density 6061 aerospace-grade aluminum back section creates a high moment of inertia structure. Precise center of gravity positioning and weight distribution further increase MOI, improving repeatability and stability during stroke.
■Zero Torque Pattern Design
The KBS shaft is inserted with a 1° tilt so that it is in a straight line with the center of gravity, and is offset 25mm behind the leading edge. This results in a toe-up balance, where the toe points upward, improving stability throughout the entire stroke.
■Improved sole camber
TaylorMade's club engineers have designed a newly improved "cambered sole" for the "Spider ZT" putter to accommodate a variety of player types. The curve of this sole works in conjunction with the hosel located towards the toe to support proper alignment. This makes it easier to accurately aim the face at the target at address.
■ Premium Milled True Path Alignment
"True Path Alignment" is a feature inherited from the early days of Spider putters, but it has been newly redesigned for the "Spider ZT" putter. The top of the 303 stainless steel face features a thin, precisely milled line the same width as a golf ball. This makes it easier to accurately position the putter behind the ball with each putt.
■ "Pure Roll" insert produces a soft sound and feel.
It features a "Pure Roll" insert made from a composite material of Surlyn and aluminum. The grooves, which are set downwards at a 45-degree angle, efficiently generate topspin and ensure a smooth roll.

The ultimate combination of Ai-DUAL insert and racket hosel!
"Ai-DUAL TRI-BEAM" is born.

■【Features & Benefits】Two types of resin: soft on the side that hits the ball and hard on the inside: The "Ai-DUAL TRI-BEAM Putter" is equipped with the Ai-DUAL insert, which, like the previously released Ai-DUAL putter, was completed after approximately 15,000 simulations and the production of 72 prototypes. Unlike the Ai-ONE insert and Ai-ONE Titanium insert, the Ai-DUAL insert is made only of resin, employing a structure with soft resin on the side that hits the ball and hard resin on the inside. ■The "Ai-DUAL TRI-BEAM Putter" is a product that combines the racket hosel, which was first introduced in the "TRI-BEAM Putter," with the newly developed Ai-DUAL insert: Like the Ai-ONE insert, it maintains stability of ball speed even on off-center hits, and compared to conventional putters, it applies more forward spin (topspin) regardless of the point of impact, reducing the influence of the grain of the grass and slope, allowing you to aim for the cup with a thinner line (reading the curve less). It makes it easier to achieve the intended distance and direction, greatly increasing the chances of sinking the putt. In addition, the racket hosel is highly resistant to head wobble, resulting in a model that pursues ultimate forgiveness. ■There is a wide lineup, with a total of 10 different types available.

The ultimate combination of Ai-DUAL insert and racket hosel!
"Ai-DUAL TRI-BEAM" is born.

■【Features & Benefits】Two types of resin: soft on the side that hits the ball and hard on the inside: The "Ai-DUAL TRI-BEAM Putter" is equipped with the Ai-DUAL insert, which, like the previously released Ai-DUAL putter, was completed after approximately 15,000 simulations and the production of 72 prototypes. Unlike the Ai-ONE insert and Ai-ONE Titanium insert, the Ai-DUAL insert is made only of resin, employing a structure with soft resin on the side that hits the ball and hard resin on the inside. ■The "Ai-DUAL TRI-BEAM Putter" is a product that combines the racket hosel, which was first introduced in the "TRI-BEAM Putter," with the newly developed Ai-DUAL insert: Like the Ai-ONE insert, it maintains stability of ball speed even on off-center hits, and compared to conventional putters, it applies more forward spin (topspin) regardless of the point of impact, reducing the influence of the grain of the grass and slope, allowing you to aim for the cup with a thinner line (reading the curve less). It makes it easier to achieve the intended distance and direction, greatly increasing the chances of sinking the putt. In addition, the racket hosel is highly resistant to head wobble, resulting in a model that pursues ultimate forgiveness. ■There is a wide lineup, with a total of 10 different types available.

The ultimate combination of Ai-DUAL insert and racket hosel!
"Ai-DUAL TRI-BEAM" is born.

■【Features & Benefits】Two types of resin: soft on the side that hits the ball and hard on the inside: The "Ai-DUAL TRI-BEAM Putter" is equipped with the Ai-DUAL insert, which, like the previously released Ai-DUAL putter, was completed after approximately 15,000 simulations and the production of 72 prototypes. Unlike the Ai-ONE insert and Ai-ONE Titanium insert, the Ai-DUAL insert is made only of resin, employing a structure with soft resin on the side that hits the ball and hard resin on the inside. ■The "Ai-DUAL TRI-BEAM Putter" is a product that combines the racket hosel, which was first introduced in the "TRI-BEAM Putter," with the newly developed Ai-DUAL insert: Like the Ai-ONE insert, it maintains stability of ball speed even on off-center hits, and compared to conventional putters, it applies more forward spin (topspin) regardless of the point of impact, reducing the influence of the grain of the grass and slope, allowing you to aim for the cup with a thinner line (reading the curve less). It makes it easier to achieve the intended distance and direction, greatly increasing the chances of sinking the putt. In addition, the racket hosel is highly resistant to head wobble, resulting in a model that pursues ultimate forgiveness. ■There is a wide lineup, with a total of 10 different types available.

The ultimate combination of Ai-DUAL insert and racket hosel!
"Ai-DUAL TRI-BEAM" is born.

■【Features & Benefits】Two types of resin: soft on the side that hits the ball and hard on the inside: The "Ai-DUAL TRI-BEAM Putter" is equipped with the Ai-DUAL insert, which, like the previously released Ai-DUAL putter, was completed after approximately 15,000 simulations and the production of 72 prototypes. Unlike the Ai-ONE insert and Ai-ONE Titanium insert, the Ai-DUAL insert is made only of resin, employing a structure with soft resin on the side that hits the ball and hard resin on the inside. ■The "Ai-DUAL TRI-BEAM Putter" is a product that combines the racket hosel, which was first introduced in the "TRI-BEAM Putter," with the newly developed Ai-DUAL insert: Like the Ai-ONE insert, it maintains stability of ball speed even on off-center hits, and compared to conventional putters, it applies more forward spin (topspin) regardless of the point of impact, reducing the influence of the grain of the grass and slope, allowing you to aim for the cup with a thinner line (reading the curve less). It makes it easier to achieve the intended distance and direction, greatly increasing the chances of sinking the putt. In addition, the racket hosel is highly resistant to head wobble, resulting in a model that pursues ultimate forgiveness. ■There is a wide lineup, with a total of 10 different types available.

Aim for 9 putts for the half!
A new model that stabilizes stroke and roll by integrating the body and club!
■Semi-medium length for added stability.
With a length of 36 inches, this mid-length club is perfectly suited to the physique of Japanese golfers, allowing you to maintain a natural form from address to stroke. The longer and heavier design increases the moment of inertia, resulting in a stable stroke that feels as if your body and club are naturally fixed together.
■ Gentle, large core with a high hex face.
This putter features a trapezoidal hexagonal High Hex Face (face height 29.5mm), which is approximately 5mm higher than the face height of a typical putter. Even if the point of impact varies vertically, energy is effectively transferred to the ball, resulting in a stable roll. The face material is a thick 6.5mm duralumin insert face, improving the feel of the putt.
■ Creates a stable stroke.
By setting the overall club weight to approximately 610g, it achieves a moment of inertia about 1.25 times greater than that of typical models. This results in a straighter putter that cannot be achieved with lighter putters, and a stable stroke that is less affected by mishits.

Aim for 9 putts for the half!
A new model that stabilizes stroke and roll by integrating the body and club!
■Semi-medium length for added stability.
With a length of 36 inches, this mid-length club is perfectly suited to the physique of Japanese golfers, allowing you to maintain a natural form from address to stroke. The longer and heavier design increases the moment of inertia, resulting in a stable stroke that feels as if your body and club are naturally fixed together.
■ Gentle, large core with a high hex face.
This putter features a trapezoidal hexagonal High Hex Face (face height 29.5mm), which is approximately 5mm higher than the face height of a typical putter. Even if the point of impact varies vertically, energy is effectively transferred to the ball, resulting in a stable roll. The face material is a thick 6.5mm duralumin insert face, improving the feel of the putt.
■ Creates a stable stroke.
By setting the overall club weight to approximately 610g, it achieves a moment of inertia about 1.25 times greater than that of typical models. This results in a straighter putter that cannot be achieved with lighter putters, and a stable stroke that is less affected by mishits.

Aim for 9 putts for the half!
A new model that stabilizes stroke and roll by integrating the body and club!
■Semi-medium length for added stability.
With a length of 36 inches, this mid-length club is perfectly suited to the physique of Japanese golfers, allowing you to maintain a natural form from address to stroke. The longer and heavier design increases the moment of inertia, resulting in a stable stroke that feels as if your body and club are naturally fixed together.
■ Gentle, large core with a high hex face.
This putter features a trapezoidal hexagonal High Hex Face (face height 29.5mm), which is approximately 5mm higher than the face height of a typical putter. Even if the point of impact varies vertically, energy is effectively transferred to the ball, resulting in a stable roll. The face material is a thick 6.5mm duralumin insert face, improving the feel of the putt.
■ Creates a stable stroke.
By setting the overall club weight to approximately 610g, it achieves a moment of inertia about 1.25 times greater than that of typical models. This results in a straighter putter that cannot be achieved with lighter putters, and a stable stroke that is less affected by mishits.

A wingback mallet with a sharp edge and maximum toe flow
The Phantom 7.5 builds upon a tour-trusted, precise design, further enhancing alignment, forgiveness, and feel. Long, sharp wings and a blade-like topline combine a sharp, sophisticated look with ease of use. A deeper face stabilizes ball position, while the newly adopted full-face "Studio Carbon Steel Insert" provides an even softer feel at impact. The neck features a jet neck design.
*Double bend (Phantom 7) and plumbing neck (Phantom 7.2) models are also available in the lineup.
■A shape and setup refined on the tour. The Phantom 7.5 features a deeper face, a rounded topline, and a redesigned soleplate. It provides a clean and consistent setup that gives you confidence the moment you address the ball.
■A face that connects feel and performance. The full-face "Studio Carbon Steel Insert," redesigned specifically for the Phantom, features a chain-link milled pattern. In addition to a soft sound and feel, it provides sharp distance control.
■Designed to match the flow of your stroke. The Phantom 7.5, with its Jet Neck design, maximizes toe flow to achieve blade-like face control.
■Exceptional precision and craftsmanship. Polished by the hands of skilled artisans and crafted from carefully selected materials, the Phantom is designed with unparalleled precision, delivering beauty, feel, and performance that exceeds all expectations.

Sharp-edged wingback mallet with minimal toe flow
The Phantom 7 builds on the precision design trusted on the tour with improved alignment, forgiveness, and feel. The long, sharp wings and blade-like topline combine a sharp, refined look with forgiveness. The deeper face stabilizes ball position, and the new full-face "Studio Carbon Steel Insert" provides a softer feel at impact. The neck features a double-bent shaft.
*Plumbing neck (Phantom 7.2) and jet neck (Phantom 7.5) are also available.
Tour-honed shape and setup: The Phantom 7 features a deeper face, a rounded topline, and a redesigned sole plate for a clean, consistent setup that provides confidence right from the get-go.
A face design that connects feel and performance. The full-face Studio Carbon Steel Insert, redesigned exclusively for the Phantom, features a chain-link milled pattern. It delivers a soft sound and feel on impact, as well as sharp distance control.
Designed to match the flow of your stroke: The Phantom 7 features a double-bent shaft for a straight-back/straight-through stroke with minimal toe flow.
■Unparalleled precision and craftsmanship. Hand-polished and carved from select materials, Phantom is engineered with unparalleled precision to deliver beauty, feel, and performance that exceeds all expectations.

Rebuilt for the modern player
The Santa Fe putter has been a beloved Scotty Cameron icon for over 30 years. This classic is back in the 2026 Studio Style lineup. The classic Newport-style blade design combines premium materials and cutting-edge technology to create a model that combines tradition and innovation, delivering the ultimate in beauty, feel, and precision. The new Studio Carbon Steel (SCS) face insert utilizes chain-link face milling technology to deliver consistent roll, a soft sound, and exceptional feel. Finished with Scotty Cameron's signature translucent red cherry dot and engraved 7-point crown, the timeless design evokes the artisan's touch. The neck features a flow neck.
The Santa Fe combines classic blade design with modern performance. This Scotty Cameron classic has been reimagined with the latest tour-trusted technology for a softer feel and precise speed control.

The ball speed stability and high-quality forward spin are cutting edge. The behavior and design are standard.
The Ai-DUAL putter combines Odyssey's most popular head with the newly developed Ai-DUAL insert. Like the Ai-ONE insert, it maintains ball speed stability even on off-center hits, while generating more forward spin (clockwise rotation) than previous models, regardless of impact location. By reducing the impact of turf grain and slope, you can aim for the cup with a thinner line (meaning less curvature). ■ Two types of urethane resin: a soft surface that strikes the ball and a hard interior: Unlike the Ai-ONE insert and Ai-ONE Titanium insert, this insert is made entirely of urethane resin, featuring a two-layer structure with a soft resin surface and a hard resin interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The boundary between the two resin layers of the Ai-DUAL insert has a complex, winding shape, similar to the back of the Ai-ONE insert. This insert was developed by AI with a focus on not only providing the same performance as the Ai-ONE insert, which maintains consistent ball speed no matter where you hit it, but also on the spin it imparts to the ball. ■The grooves, shaped like an isosceles triangle, also contribute to a good roll through forward spin: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to a good roll. ■Realizes a feel and sound closer to the WHITEHOT insert: The Ai-DUAL insert is made entirely of urethane resin, so it has a softer feel and is designed to produce a sound closer to the WHITEHOT insert than the Ai-ONE insert. ■There are six types in the lineup, and customization is also available.

Zero torque + half-ball alignment keeps every putt straight.
The popular Zero Torque model now features the latest alignment technology, which clearly identifies setup errors. The Ai-DUAL Square 2 Square Half Ball Putter features a MAX-type head with a large fan-shaped rear and a white half-ball (half of a ball) alignment with a black line at the front of the top surface. The shaft is mounted just behind it at the center of gravity, maintaining a toe-up position throughout the stroke. The face, of course, features the latest Ai-DUAL insert, which combines two resins with a complex curved surface designed by AI. ■The semicircle's combination of straight and curved lines creates a significant effect: The Ai-DUAL Square 2 Square Half Ball Putter can be considered the zero torque version of the Ai-DUAL Half Ball Putter. Of course, the half-ball alignment is also depicted at the front of the head. ■The Ai-DUAL Insert features two types of urethane resin: a soft surface and a hard interior for hitting the ball. As the "Ai" in the name suggests, the insert was designed by AI. However, unlike the Ai-ONE Insert and Ai-ONE Titanium Insert, this insert is made entirely of urethane resin, featuring a two-layer structure with a soft resin surface that strikes the ball and a hard resin interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The boundary between the two resin layers of the Ai-DUAL Insert has a complex, winding shape, similar to the back of the Ai-ONE Insert. This was developed by AI with a focus on imparting spin to the ball, as well as the performance of the Ai-ONE Insert, which stabilizes ball speed regardless of impact. ■ Isosceles triangle-shaped grooves also contribute to excellent forward spin roll: The Ai-DUAL Insert's newly adopted FRD (Forward Roll Design) grooves also contribute to excellent roll. ■ Achieves a feel and sound closer to the WHITEHOT Insert: The Ai-DUAL Insert also takes further consideration of feel and sound. The Ai-DUAL Insert is made entirely of urethane resin, providing a soft feel and a sound closer to the White Hot Insert than the Ai-ONE Insert. The Ai-DUAL Square 2 Square Half BALL CRUISER Putter's head features a large, fan-shaped rear section, making it a MAX type with a high moment of inertia. The shaft model is a black STROKELAB shaft, while the 38-inch model uses a STROKELAB140 shaft. To achieve zero torque, this shaft is positioned slightly away from the face, centered at the head's center of gravity in the toe-heel direction. Because the face is positioned significantly forward from its mounting position, it is tilted diagonally toward the ball flight line. There is no left-handed model available, and customization is not possible.

The latest AI insert delivers improved roll, consistent forward rotation, ball speed, and a soft feel.
The new Ai-DUAL Square 2 Square Putter features the Ai-DUAL insert, which combines two types of urethane resin with varying hardness and a complex, uneven curve, and features New F.RD (Forward Roll Design) grooves. Like the Ai-ONE insert, it not only resists ball speed loss even on off-center hits, but is also designed to consistently generate forward spin regardless of impact location. ■ Two types of urethane resin: a soft surface and a hard interior: As the "Ai" in its name suggests, the Ai-DUAL insert was designed by AI. However, unlike the Ai-ONE insert and Ai-ONE Titanium insert, it is made entirely of urethane resin, featuring a two-layer structure: a soft surface and a hard interior. ■ Produces not only stable ball speed but also high-quality forward spin: The Ai-DUAL Insert features an uneven, complex, winding cross-section at the boundary between the two resin layers. The newly adopted FRD (Forward Roll Design) groove not only stabilizes ball speed even on off-center hits, but was developed by AI with a focus on imparting spin to the ball. ■ Achieves a feel and sound closer to that of the WHITEHOT Insert: The Ai-DUAL Insert has been further refined in terms of feel and sound. Made entirely of urethane resin, the Ai-DUAL Insert offers a softer feel and is designed to produce a sound closer to that of the WHITEHOT Insert than the Ai-ONE Insert. ■ A non-angled grip allows for a natural stroke: The grip is also noteworthy. It features the S2S ReverseTaper 2.0 OS Grip, which has a triangular cross-section and gradually thickens from the grip toward the head. ■The lineup includes the horn-shaped #7 and JAILBIRD: The Ai-DUAL Square 2 Square Putter head lineup consists of two types: the horn-shaped #7 and the JAILBIRD with its black and white striped alignment. The Ai-DUAL Square 2 Square Putter can also be customized.

The latest AI insert delivers improved roll, consistent forward rotation, ball speed, and a soft feel.
The new Ai-DUAL Square 2 Square Putter features the Ai-DUAL insert, which combines two types of urethane resin with varying hardness and a complex, uneven curve, and features New F.RD (Forward Roll Design) grooves. Like the Ai-ONE insert, it not only resists ball speed loss even on off-center hits, but is also designed to consistently generate forward spin regardless of impact location. ■ Two types of urethane resin: a soft surface and a hard interior: As the "Ai" in its name suggests, the Ai-DUAL insert was designed by AI. However, unlike the Ai-ONE insert and Ai-ONE Titanium insert, it is made entirely of urethane resin, featuring a two-layer structure: a soft surface and a hard interior. ■ Produces not only stable ball speed but also high-quality forward spin: The Ai-DUAL Insert features an uneven, complex, winding cross-section at the boundary between the two resin layers. The newly adopted FRD (Forward Roll Design) groove not only stabilizes ball speed even on off-center hits, but was developed by AI with a focus on imparting spin to the ball. ■ Achieves a feel and sound closer to that of the WHITEHOT Insert: The Ai-DUAL Insert has been further refined in terms of feel and sound. Made entirely of urethane resin, the Ai-DUAL Insert offers a softer feel and is designed to produce a sound closer to that of the WHITEHOT Insert than the Ai-ONE Insert. ■ A non-angled grip allows for a natural stroke: The grip is also noteworthy. It features the S2S ReverseTaper 2.0 OS Grip, which has a triangular cross-section and gradually thickens from the grip toward the head. ■The lineup includes the horn-shaped #7 and JAILBIRD: The Ai-DUAL Square 2 Square Putter head lineup consists of two types: the horn-shaped #7 and the JAILBIRD with its black and white striped alignment. The Ai-DUAL Square 2 Square Putter can also be customized.

The half ball (half of a ball) makes it easy to see any misalignment. A new type of circular alignment has been born.
Odyssey's circle-based alignment system introduces a completely new type. The new Ai-DUAL Half Ball putter uses a single ball cut in half, rather than lining up multiple balls like the 2-BALL. The combination of curved and straight lines, including the black line in the center, effectively allows you to easily identify the alignment of the face relative to the ball and the target at address. ■The significant effect of the straight and curved semicircle: The Ai-DUAL Half Ball putter stands out from other models the moment you set up. This is due to the half ball, as its name suggests, painted on the front of the head. This is a new alignment system introduced by Odyssey. The semicircle, with its straight front and curved back, makes it easier to sense misalignment between the face and ball when set up more than a perfect circle. By aligning the ball with the center alignment line, you can achieve even more accurate setup. ■ Two types of urethane resin: a soft surface that hits the ball and a hard interior: As the "Ai" in the name suggests, the Ai-DUAL Insert was designed by AI. However, unlike the Ai-ONE Insert and Ai-ONE Titanium Insert, this insert is made solely of urethane resin, with a two-layer structure: a soft surface that hits the ball and a hard interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The Ai-DUAL Insert's two-layer resin has a complex, winding shape, similar to the back of the Ai-ONE Insert. This was developed by AI with a focus on not only the performance of the Ai-ONE Insert, which stabilizes ball speed regardless of where the ball is hit, but also the spin imparted to the ball. The Ai-DUAL Insert is designed to generate stable forward spin (clockwise rotation) regardless of where the ball is hit, such as on the top or bottom of the face. ■The grooves, shaped like an isosceles triangle, also contribute to excellent forward spin and roll: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to excellent roll. ■Achieves a feel and sound closer to that of a WHITEHOT insert: The Ai-DUAL insert has been designed with even more consideration given to feel and sound. The Ai-DUAL insert is made entirely of urethane resin, resulting in a softer feel and a sound closer to that of a WHITEHOT insert than the Ai-ONE insert. ■The lineup includes two CRUISER-type putters. The Ai-DUAL Half BALL CRUISER putter is limited in quantity and cannot be customized.

The half ball (half of a ball) makes it easy to see any misalignment. A new type of circular alignment has been born.
Odyssey's circle-based alignment system introduces a completely new type. The new Ai-DUAL Half Ball putter uses a single ball cut in half, rather than lining up multiple balls like the 2-BALL. The combination of curved and straight lines, including the black line in the center, effectively allows you to easily identify the alignment of the face relative to the ball and the target at address. ■The significant effect of the straight and curved semicircle: The Ai-DUAL Half Ball putter stands out from other models the moment you set up. This is due to the half ball, as its name suggests, painted on the front of the head. This is a new alignment system introduced by Odyssey. The semicircle, with its straight front and curved back, makes it easier to sense misalignment between the face and ball when set up in a more complete circle. By aligning the ball with the center alignment line, you can achieve even more accurate setup. ■ Two types of urethane resin: a soft surface that hits the ball and a hard interior: As the "Ai" in the name suggests, the Ai-DUAL Insert was designed by AI. However, unlike the Ai-ONE Insert and Ai-ONE Titanium Insert, this insert is made solely of urethane resin, with a two-layer structure: a soft surface that hits the ball and a hard interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The Ai-DUAL Insert's two-layer resin has a complex, winding shape, similar to the back of the Ai-ONE Insert. This was developed by AI with a focus on not only the performance of the Ai-ONE Insert, which stabilizes ball speed regardless of where the ball is hit, but also the spin imparted to the ball. The Ai-DUAL Insert is designed to generate stable forward spin (clockwise rotation) regardless of where the ball is hit, such as on the top or bottom of the face. ■The grooves, shaped like an isosceles triangle, also contribute to excellent forward spin and roll: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to excellent roll. ■Realizes a feel and sound closer to that of a WHITEHOT insert: The Ai-DUAL insert has been designed with even more consideration given to feel and sound. The Ai-DUAL insert is made entirely of urethane resin, resulting in a softer feel and a sound closer to that of a WHITEHOT insert than the Ai-ONE insert. ■The lineup includes two CRUISER-type putters. The Ai-DUAL Half BALL CRUISER putter is limited in quantity and cannot be customized.

The half ball (half of a ball) makes it easy to see any misalignment. A new type of circular alignment has been born.
Odyssey's circle-based alignment system introduces a completely new type. The new Ai-DUAL Half Ball putter uses a single ball cut in half, rather than lining up multiple balls like the 2-BALL. The combination of curved and straight lines, including the black line in the center, effectively allows you to easily identify the alignment of the face relative to the ball and the target at address. ■The significant effect of the straight and curved semicircle: The Ai-DUAL Half Ball putter stands out from other models the moment you set up. This is due to the half ball, as its name suggests, painted on the front of the head. This is a new alignment system introduced by Odyssey. The semicircle, with its straight front and curved back, makes it easier to sense misalignment between the face and ball when set up in a more complete circle. By aligning the ball with the center alignment line, you can achieve even more accurate setup. ■ Two types of urethane resin: a soft surface that hits the ball and a hard interior: As the "Ai" in the name suggests, the Ai-DUAL Insert was designed by AI. However, unlike the Ai-ONE Insert and Ai-ONE Titanium Insert, this insert is made solely of urethane resin, with a two-layer structure: a soft surface that hits the ball and a hard interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The Ai-DUAL Insert's two-layer resin has a complex, winding shape, similar to the back of the Ai-ONE Insert. This was developed by AI with a focus on not only the performance of the Ai-ONE Insert, which stabilizes ball speed regardless of where the ball is hit, but also the spin imparted to the ball. The Ai-DUAL Insert is designed to generate stable forward spin (clockwise rotation) regardless of where the ball is hit, such as on the top or bottom of the face. ■The grooves, shaped like an isosceles triangle, also contribute to excellent forward spin and roll: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to excellent roll. ■Realizes a feel and sound closer to that of the WHITEHOT insert: The Ai-DUAL insert has been designed with even more consideration given to feel and sound. The Ai-DUAL insert is made entirely of urethane resin, so it has a softer feel and is designed to produce a sound closer to that of the WHITEHOT insert than the Ai-ONE insert. ■The lineup consists of three standard models. The Ai-DUAL Half BALL putter can also be customized.

The half ball (half of a ball) makes it easy to see any misalignment. A new type of circular alignment has been born.
Odyssey's circle-based alignment system introduces a completely new type. The new Ai-DUAL Half Ball putter uses a single ball cut in half, rather than lining up multiple balls like the 2-BALL. The combination of curved and straight lines, including the black line in the center, effectively allows you to easily identify the alignment of the face relative to the ball and the target at address. ■The significant effect of the straight and curved semicircle: The Ai-DUAL Half Ball putter stands out from other models the moment you set up. This is due to the half ball, as its name suggests, painted on the front of the head. This is a new alignment system introduced by Odyssey. The semicircle, with its straight front and curved back, makes it easier to sense misalignment between the face and ball when set up in a more complete circle. By aligning the ball with the center alignment line, you can achieve even more accurate setup. ■ Two types of urethane resin: a soft surface that hits the ball and a hard interior: As the "Ai" in the name suggests, the Ai-DUAL Insert was designed by AI. However, unlike the Ai-ONE Insert and Ai-ONE Titanium Insert, this insert is made solely of urethane resin, with a two-layer structure: a soft surface that hits the ball and a hard interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The Ai-DUAL Insert's two-layer resin has a complex, winding shape, similar to the back of the Ai-ONE Insert. This was developed by AI with a focus on not only the performance of the Ai-ONE Insert, which stabilizes ball speed regardless of where the ball is hit, but also the spin imparted to the ball. The Ai-DUAL Insert is designed to generate stable forward spin (clockwise rotation) regardless of where the ball is hit, such as on the top or bottom of the face. ■The grooves, shaped like an isosceles triangle, also contribute to excellent forward spin and roll: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to excellent roll. ■Realizes a feel and sound closer to that of the WHITEHOT insert: The Ai-DUAL insert has been designed with even more consideration given to feel and sound. The Ai-DUAL insert is made entirely of urethane resin, so it has a softer feel and is designed to produce a sound closer to that of the WHITEHOT insert than the Ai-ONE insert. ■The lineup consists of three standard models. The Ai-DUAL Half BALL putter can also be customized.

The half ball (half of a ball) makes it easy to see any misalignment. A new type of circular alignment has been born.
Odyssey's circle-based alignment system introduces a completely new approach. The new Ai-DUAL Half Ball putter uses a single ball cut in half, rather than lining up multiple balls like the 2-BALL. The combination of curved and curved lines, including the black line in the center, effectively allows you to easily identify the alignment of the face relative to the ball and the target at address. ■The significant effect of the straight and curved semicircle: The Ai-DUAL Half Ball putter stands out from other models the moment you set up. This is due to the half ball, as its name suggests, painted on the front of the head. This is a new alignment system introduced by Odyssey. The semicircle, with its straight line in the front and curved line in the back, makes it easier to sense any misalignment between the face and the ball when set up more than a perfect circle. By aligning the ball with the center alignment line, you can achieve even more accurate setup. ■ Two types of urethane resin: a soft surface that hits the ball and a hard interior: As the "Ai" in the name suggests, the Ai-DUAL Insert was designed by AI. However, unlike the Ai-ONE Insert and Ai-ONE Titanium Insert, this insert is made solely of urethane resin, with a two-layer structure: a soft surface that hits the ball and a hard interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The Ai-DUAL Insert's two-layer resin has a complex, winding shape, similar to the back of the Ai-ONE Insert. This was developed by AI with a focus on not only the performance of the Ai-ONE Insert, which stabilizes ball speed regardless of where the ball is hit, but also the spin imparted to the ball. The Ai-DUAL Insert is designed to generate stable forward spin (clockwise rotation) regardless of where the ball is hit, such as on the top or bottom of the face. ■The grooves, shaped like an isosceles triangle, also contribute to excellent forward spin and roll: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to excellent roll. ■Realizes a feel and sound closer to that of the WHITEHOT insert: The Ai-DUAL insert has been designed with even more consideration given to feel and sound. The Ai-DUAL insert is made entirely of urethane resin, so it has a softer feel and is designed to produce a sound closer to that of the WHITEHOT insert than the Ai-ONE insert. ■The lineup consists of three standard models. The Ai-DUAL Half BALL putter can also be customized.

The ball speed stability and high-quality forward spin are cutting edge. The behavior and design are standard.
The Ai-DUAL putter combines Odyssey's most popular head with the newly developed Ai-DUAL insert. Like the Ai-ONE insert, it maintains ball speed stability even on off-center hits, while generating more forward spin (clockwise rotation) than previous models, regardless of impact location. By reducing the impact of turf grain and slope, you can aim for the cup with a thinner line (meaning less curvature). ■ Two types of urethane resin: a soft surface that strikes the ball and a hard interior: Unlike the Ai-ONE insert and Ai-ONE Titanium insert, this insert is made entirely of urethane resin, featuring a two-layer structure with a soft resin surface and a hard resin interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The boundary between the two resin layers of the Ai-DUAL insert has a complex, winding shape, similar to the back of the Ai-ONE insert. This insert was developed by AI with a focus on not only providing the same performance as the Ai-ONE insert, which maintains consistent ball speed no matter where you hit it, but also on the spin it imparts to the ball. ■The grooves, shaped like an isosceles triangle, also contribute to a good roll through forward spin: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to a good roll. ■Realizes a feel and sound closer to the WHITEHOT insert: The Ai-DUAL insert is made entirely of urethane resin, so it has a softer feel and is designed to produce a sound closer to the WHITEHOT insert than the Ai-ONE insert. ■There are six types in the lineup, and customization is also available.

The ball speed stability and high-quality forward spin are cutting edge. The behavior and design are standard.
The Ai-DUAL putter combines Odyssey's most popular head with the newly developed Ai-DUAL insert. Like the Ai-ONE insert, it maintains ball speed stability even on off-center hits, while generating more forward spin (clockwise rotation) than previous models, regardless of impact location. By reducing the impact of turf grain and slope, you can aim for the cup with a thinner line (meaning less curvature). ■ Two types of urethane resin: a soft surface that strikes the ball and a hard interior: Unlike the Ai-ONE insert and Ai-ONE Titanium insert, this insert is made entirely of urethane resin, featuring a two-layer structure with a soft resin surface and a hard resin interior. ■ An insert that not only stabilizes ball speed but also generates more forward spin: The boundary between the two resin layers of the Ai-DUAL insert has a complex, winding shape, similar to the back of the Ai-ONE insert. This insert was developed by AI with a focus on not only providing the same performance as the Ai-ONE insert, which maintains consistent ball speed no matter where you hit it, but also on the spin it imparts to the ball. ■The grooves, shaped like an isosceles triangle, also contribute to a good roll through forward spin: The Ai-DUAL insert's newly adopted FRD (Forward Roll Design) grooves also contribute to a good roll. ■Realizes a feel and sound closer to the WHITEHOT insert: The Ai-DUAL insert is made entirely of urethane resin, so it has a softer feel and is designed to produce a sound closer to the WHITEHOT insert than the Ai-ONE insert. ■There are six types in the lineup, and customization is also available.

A beginner putter for those looking to improve their accuracy and feel, this is the perfect choice for golfers beginning to hone their skills on the green.

A beginner putter for those looking to improve their accuracy and feel, this is the perfect choice for golfers beginning to hone their skills on the green.

A beginner putter for those looking to improve their accuracy and feel, this is the perfect choice for golfers beginning to hone their skills on the green.

A modern take on the timeless classic 8802 putter. Players will be captivated by its inherited feel and high accuracy.
[SOFT 304 STAINLESS STEEL]
The extremely soft 304 stainless steel machined head creates a soft feel like no other.
[PERFECT BALANCE]
The balanced weight distribution provides a comfortable swing feel and stable strokes.
[PRECISION MILLING]
It is made with extremely precise face milling, which produces an excellent feel and stabilizes the ball's roll.

New name and body color, first renewal in four years
The DFX putter, which was revived in 2021, has been redesigned for the first time in four years with a new name: "DFX BY ODYSSEY Putter." It retains the Odyssey's softest feel from the previous model. Meanwhile, the color of the stainless steel body has been changed from black to charcoal gray, further enhancing the bold black insert. Five head types are available: #1 CH, #1W CH, V-LINE FANG DB, #10 S, and 2-BALL BLADE CH. All are reasonably priced, making them suitable for a wide range of skill levels.

New PEBAX insert for soft yet smooth rolling

■Comfortable and soft feel
Developed in response to requests from Japanese golfers, this club provides a soft feel that Japanese people prefer.
■Soft yet rolls with high resilience
PEBAX is an innovative material that is lightweight and flexible, yet also rigid and durable. It has been optimized for golf, achieving the contradictory characteristics of a soft feel and high resilience.
■Solid hitting sound
Although it is a soft insert, the clear sound feedback makes it easy to get a feel for the roll, providing a stable touch and making it easier to adjust the distance.
■Lightweight and resistant to mishits
By incorporating a lightweight insert into the face, the center of gravity is deeper, resulting in a higher MOI and less loss of initial velocity even on off-center hits.

[ANSER 4]
The answer to preventing snagging with a short neck
The Answer 4 features a longer blade length and a larger shape than the Answer. In addition to providing a sense of security, the short slant neck makes it easier to feel the opening and closing of the face, making it recommended for golfers who struggle with hooking.

New PEBAX insert for soft yet smooth rolling

■Comfortable and soft feel
Developed in response to requests from Japanese golfers, this club provides a soft feel that Japanese people prefer.
■Soft yet rolls with high resilience
PEBAX is an innovative material that is lightweight and flexible, yet also rigid and durable. It has been optimized for golf, achieving the contradictory characteristics of a soft feel and high resilience.
■Solid hitting sound
Although it is a soft insert, the clear sound feedback makes it easy to get a feel for the roll, providing a stable touch and making it easier to adjust the distance.
■Lightweight and resistant to mishits
By incorporating a lightweight insert into the face, the center of gravity is deeper, resulting in a higher MOI and less loss of initial velocity even on off-center hits.

[ANSER]
The winningest putter in PING history
The Answer putter is PING's signature model. It's said to be the origin of the PING style, but with the latest PEBAX insert, it delivers exceptional roll.

New PEBAX insert for soft yet smooth rolling

■Comfortable and soft feel
Developed in response to requests from Japanese golfers, this club provides a soft feel that Japanese people prefer.
■Soft yet rolls with high resilience
PEBAX is an innovative material that is lightweight and flexible, yet also rigid and durable. It has been optimized for golf, achieving the contradictory characteristics of a soft feel and high resilience.
■Solid hitting sound
Although it is a soft insert, the clear sound feedback makes it easy to get a feel for the roll, providing a stable touch and making it easier to adjust the distance.
■Lightweight and resistant to mishits
By incorporating a lightweight insert into the face, the center of gravity is deeper, resulting in a higher MOI and less loss of initial velocity even on off-center hits.

[ANSER]
The winningest putter in PING history
The Answer putter is PING's signature model. It's said to be the origin of the PING style, but with the latest PEBAX insert, it delivers exceptional roll.

[Studio Style Models]
The 2025 Studio Style models, created to commemorate the 20th anniversary of the original Studio Style featuring GSS inserts, feature softer Studio Carbon Steel (SCS) face inserts with chain link face milling technology in all models.
[Catalina]
Featuring a slightly wider head with a higher moment of inertia than the Newport and an updated single-bent shaft for near-face-balanced performance, this new model, with a name reminiscent of its predecessor, offers a soft sound, superior feel and unparalleled performance thanks to the SCS face insert.

[Studio Style Models]
The 2025 Studio Style models, created to commemorate the 20th anniversary of the original Studio Style featuring GSS inserts, feature softer Studio Carbon Steel (SCS) face inserts with chain link face milling technology in all models.
[Fastback 1.5]
Featuring a 3/4 shaft offset I-Beam Jet neck for enhanced toe flow, this model is back with a redesigned mid-mallet putter featuring an SCS face insert and two-tone vertical alignment for players seeking the performance of a compact mallet with the feel of a blade.

[Studio Style Models]
The 2025 Studio Style models, created to commemorate the 20th anniversary of the original Studio Style featuring GSS inserts, feature softer Studio Carbon Steel (SCS) face inserts with chain link face milling technology in all models.
[Newport 2.5 Plus]
Built similarly to the Newport 2 Plus, but with an I-Beam Jet Neck for increased toe flow, this shape features a soft SCS face insert, advanced vibration damping technology, chain-link face milling, and a 6061 aluminum sole plate for efficient perimeter weight distribution, improved moment of inertia, and enhanced balance.

[Studio Style Models]
The 2025 Studio Style models, created to commemorate the 20th anniversary of the original Studio Style featuring GSS inserts, feature softer Studio Carbon Steel (SCS) face inserts with chain link face milling technology in all models.
[Newport Plus]
This precision-machined stainless steel putter features a slightly wider head with alignment, a plumbing neck, an SCS face insert with chain-link face milling, and a 6061 aluminum sole plate with stainless steel sole weighting for improved moment of inertia.