What is a golf wedge?
There are many different types of golf clubs, but they can be broadly divided into three categories: woods, irons, and putters. Wedges are a type of iron, and are primarily used to hit short distances, such as around the green or to escape a bunker.
Wedges can be divided into pitching wedges (PW), sand wedges (SW), approach wedges (AW), and lob wedges (LW).
Generally, when it comes to wedges from the same series as irons, pitching wedges are marked with P or Pw, and approach wedges with A or Aw. Wedges sold separately are marked with the loft angle, such as 52 or 56.
PW (Pitching Wedge) Characteristics
PWs (pitching wedges) are often included in iron sets and are primarily used for short distance shots around the green. They typically have a loft angle of around 44-48 degrees, making them versatile clubs that can be used in a variety of situations, from full shots to half shots.
AW (Approach Wedge) Features
The AW (approach wedge) is a club that plays a role between a pitching wedge and a sand wedge. Its loft angle is typically around 48-52 degrees, and it is useful when you want to hit accurate distances for approach shots around the green or over bunkers. By filling the gap between the PW and SW, it allows you to hit more precise distances.
Characteristics of SW (sand wedge)
The SW (sand wedge) is a club designed to be used primarily for bunker shots. The loft angle is typically around 54-58 degrees, and many have a wide sole and a large bounce angle, allowing for a smooth swing without sinking too far into the sand. It is effective not only for bunker shots, but also for escaping from deep rough and for high approach shots.
Characteristics of LW (lob wedge)
The LW (lob wedge) is the club with the largest loft angle of all wedges. The loft angle is generally over 60 degrees, and it is useful in situations where you want to hit the ball high and land it on the green in a short distance. For example, it is used when the pin is close by or when you want to stop the ball quickly after crossing a hazard. It requires high skill, but mastering it will enable you to make delicate approaches.
How to choose a wedge?
There are a few important points to consider when choosing a wedge.
First of all, the loft angle is the most important factor in determining the height and distance of the ball. It is important to choose a wedge that will fill the distance gap with your iron set, from pitching wedge to sand wedge to lob wedge.
Next, the bounce angle is the angle at which the club bounces off the ground. The larger the bounce angle, the more resistant you are to duffing and the easier it is to hit shots from bunkers or the rough. Conversely, a small bounce angle is suitable for shots from hard ground or shallow lies.
The shape of the sole is also important. Wide soles are more tolerant of mistakes, while narrow soles offer better maneuverability.
In recent years, some manufacturers have begun to grind the soles of their wedges, offering multiple sole shapes (grinds). These have the effect of making it easier to open the face or improving release from certain lies, allowing you to choose a wedge that suits your playing style and the conditions of the courses you often play on.
The shape of the grooves affects the amount of backspin, which determines how easily the ball stops. The material and head finish affect the feel, spin performance, and even the durability of the club. Forged soft iron wedges, in particular, have a soft feel and are preferred by golfers who seek delicate control.
The shaft is also an important factor when choosing a wedge. It is essential to choose a wedge shaft taking into account the weight balance with the shafts of the iron set. Generally, wedge shafts tend to be set to be the same weight as the iron shafts or slightly heavier.
For example, if your irons are lightweight steel (in the 90g range), choose a shaft of the same weight as the irons, or choose a steel shaft in the 100g range that is about 10 to 20g heavier.
This is because it minimizes any discomfort in swing feel when switching from irons to wedges, and is expected to reduce mistakes on short-distance approach shots. If the shaft materials (steel and carbon) are different between the iron set and wedge, the weight difference will be large, which can lead to a discomfort in the swing, so it is recommended to choose models that are as close in weight as possible.
By considering multiple points that suit your swing and playing style, you can choose the best wedge.
Choosing a wedge to match your club setup
When deciding how many wedges to buy, it's important to consider the loft of your iron set and how to fill the distance gap between each club. Generally, you'll want to place the other wedges at an appropriate interval between the loft of your pitching wedge (PW) and the loft of your longest wedge (e.g., sand wedge).
For example, if your PW has a loft angle of 44 degrees, adding an approach wedge (AW) of around 50 degrees and a sand wedge (SW) of around 56 degrees will create a flow of lofts of about 6 degrees each, making it clearer what distance you want to hit with each club. This will reduce confusion on shots within 100 yards, directly affecting your score.
Additionally, if you are including three or more wedges, it is ideal to consider their roles as pitching wedge, approach wedge, sand wedge, lob wedge, etc. and align the loft angles at intervals of 4 to 6 degrees. It is a good idea to decide how many wedges to allocate, taking into account the overall composition of your club set, especially the number of fairway woods and utilities.
Popular golf wedge rankings
- 1位:BunkR バンカー ウェッジ単品 Z-Z115 スチールシャフト 2026
- 2位:RTZツアーサテン ウェッジ単品 N.S.PRO 950GH neo スチールシャフト 2025
- 3位:FR3 ウェッジ ダイヤモンドブラックサテン仕上げ N.S.PRO DS-91w スチールシャフト 2026
- 4位:RTZ2 ブラックサテン ウェッジ単品 Dynamic Gold シャフト 2026
- 5位:RTZウェッジ単品 N.S.PRO MODUS3 TOUR 115 スチールシャフト 2025
- 6位:DJ-6 ウェッジ クロム N.S.PRO DS-91w シャフト 2023
- 7位:RM-α(アルファ)クロム NSPRO TS-114w Ver2スチールシャフト 2022【最終処分価格】
- 8位:RTZ2 ツアーサテン ウェッジ単品 N.S.PRO 950GH neo シャフト 2026
- 9位:ゼクシオ14 ウェッジ単品 MP1400シャフト 2026
- 10位:RTZ2 ツアーサテン ウェッジ単品 N.S.PRO MODUS3 TOUR115 シャフト 2026
二木ゴルフ特別価格:34100円
BunkR was developed to help all golfers who struggle with bunker shots. Bunker shots present many challenges, but with BunkR, you can easily get out of bunkers without having to think about complicated things.
■The traditional EYE2 shape makes it easy to escape from bunkers!
The face design, inherited from the EYE2 irons, provides a reassuringly easy-to-address face and high forgiveness. Furthermore, the high bounce and wide sole prevent excessive digging into the ground.
■With a smooth sole, just hit the ball!
The BunkR features a special sole design that glides effortlessly over the sand. Simply swing normally without opening the face, and you'll escape the bunker in one shot. No hesitation, no panic, and no difficult techniques required. Eligible for PING COUPON 2026.
Basic specifications
| head | Material: 431 stainless steel, finish: Hydro pearl chrome finish |
|---|---|
| shaft | Z-Z115 steel shaft |
| Shaft Specifications | Weight: 111g, Torque: 1.2°, Kick point: Mid-high |
| Content | Grip: 360 DYLAWEDGE (no backline) |
Product List
| count | flex | Loft (°) | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 64/- In stock | 64 | - | 64 | 64.5 | 35 | D5 |
二木ゴルフ特別価格:15900円
The RTZ wedge, the greatest masterpiece in the history of Cleveland Golf wedges, is born.
After repeated simulations of mixing, melting, and refining, we searched for the best compounding method and completed a new alloy that greatly enhances the performance of golf clubs.
Basic specifications
| head | [Material] Z-ALLOY, [Head Manufacturing Method] Lost-wax precision casting + face laser milling, [Finish] Tour satin finish |
|---|---|
| shaft | NSPRO 950GH neo steel shaft |
| Shaft Specifications | Weight: 91g, Torque: 1.7, Kick point: Mid-flex (S) |
| weight | Club weight: [46°・48°] 442g, [50°・52°] 446g, [54°・56°] 452g, [58°・60°・64°] 454g |
| Content | Grip: Tour Velvet Full Rubber Grip (No backline, Golf Pride logo, 49.5g/60 caliber) |
| Precautions | *Due to the emphasis on spin performance, the ball may get scratched. |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 46M/10/S In Stock | 46M | 10 | S | 64 | 35.75 | D2 |
| 48M/10/S In Stock | 48M | 10 | S | 64 | 35.75 | D2 |
| 50M/10/S in stock | 50M | 10 | S | 64 | 35.5 | D2 |
| 52M/10/S In Stock | 52M | 10 | S | 64 | 35.5 | D3 |
| 54A/8/S In Stock | 54A | 8 | S | 64 | 35.25 | D3 |
| 54M/10/S In Stock | 54M | 10 | S | 64 | 35.25 | D3 |
| 56A/8/S In Stock | 56A | 8 | S | 64 | 35.25 | D3 |
| 56M/10/S In Stock | 56M | 10 | S | 64 | 35.25 | D3 |
| 56F/12/S In Stock | 56F | 12 | S | 64 | 35.25 | D3 |
| 58A/8/S In Stock | 58A | 8 | S | 64 | 35 | D3 |
| 58F/12/S In Stock | 58F | 12 | S | 64 | 35 | D3 |
| 58L/6/S In Stock | 58L | 6 | S | 64 | 35 | D3 |
| 58M/10/S In Stock | 58M | 10 | S | 64 | 35 | D3 |
| 60A/8/S in stock | 60A | 8 | S | 64 | 35 | D3 |
| 60M/10/S in stock | 60M | 10 | S | 64 | 35 | D3 |
| 64A/8/S In Stock | 64A | 8 | S | 64 | 35 | D3 |
二木ゴルフ特別価格:27720円
ウェッジワークが苦手の方に、やさしさを形にしたFR3ウェッジ。眩しさ軽減、構えた際にシャープな印象を与えるダイヤモンドブラックサテン仕上げ。
挙動を安定させ必要なスピンがしっかり入りソフト打感のヘッドはもちろん、前作「DJ-6」より明らかに寛容性の増した新型キャニオンソール。「ローバウンス効果」(刺せる)+「ハイバウンス効果」(跳ねる)2つの要素を融合させたこのソールは、ダフリにめっぽう強くバンカーの砂質を選びません。アバウトなインパクトでボールをイージーに運べ、とにかくシンプルにミスを防ぎたいアマチュアゴルファーに多くの成功体験をもたらします。
アプローチショットに“自信”という最高の武器を身につけられる「クセになる滑り感」を味わってみませんか。
Basic specifications
| Head "1" | [Material/Manufacturing Method] Soft iron (S20C) forging (ultra-high precision, mirror-forged scoreline face) |
|---|---|
| Head "2" | [Finish] Diamond Black Satin Finish |
| shaft | NSPRO DS-91w Steel Shaft |
| Shaft Specifications | Weight: 96g (WEDGE) |
| weight | Club weight: 438g (46, 48), 442g (50, 52), 448g (54, 56, 58) |
| Content | Grip: FOCH Rubber M60R (TYPE4) No BL |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 46/11/WEDGE In Stock | 46 | 11 | WEDGE | 63 | 35.5 | D1 |
| 48/11/WEDGE In Stock | 48 | 11 | WEDGE | 63 | 35.5 | D1 |
| 50/15/WEDGE In Stock | 50 | 15 | WEDGE | 63.5 | 35.25 | D1 |
| 52/15/WEDGE In Stock | 52 | 15 | WEDGE | 63.5 | 35.25 | D1 |
| 54/16/WEDGE In Stock | 54 | 16 | WEDGE | 64 | 35 | D2 |
| 56/16/WEDGE In Stock | 56 | 16 | WEDGE | 64 | 35 | D2 |
| 58/16/WEDGE In Stock | 58 | 16 | WEDGE | 64 | 35 | D2 |
二木ゴルフ特別価格:27500円
The RTZ 2 wedge has evolved even further, offering unwavering control in all situations.
Featuring a refined shape crafted by a master builder, the unique "Z-ALLOY" material, and "ZIPCORE iQ" technology that ensures consistent performance across all lofts, this wedge offers the best balance of forgiveness and control, making it suitable for all wedge shots.
*The black satin wedge will show its base coat with normal use. (This is because it is a finish that gives it a unique texture.) As a result, the laser milling on the face will become less visible, but this will not significantly affect its performance.
*Complies with the new groove rules.
Basic specifications
| head | [Material] Z-ALLOY, [Manufacturing Method] Lost-wax precision casting + face laser milling, [Finish] Black satin |
|---|---|
| shaft | Dynamic Gold Steel Shaft |
| Shaft Specifications | Weight: 115g, Torque: -, Kick point: Butt-weighted (S200) *Weight is the weight of the 58° wedge. |
| weight | Club weight: 471g (50°/52°), 473g (54°/56°), 475g (58°/60°) |
| Content | Grip: Tour Velvet Full Rubber Grip (No backline, Golf Pride logo, 49.5g/60 caliber) |
| Precautions | Because spin performance is prioritized, the ball may get scratched. |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 50M/10/S200 in stock | 50M | 10 | S200 | 64 | 35.375 | D3 |
| 52M/10/S200 in stock | 52M | 10 | S200 | 64 | 35.375 | D3 |
| 54M/10/S200 in stock | 54M | 10 | S200 | 64 | 35.25 | D4 |
| 56 588/8/S200 In Stock | 56 588 | 8 | S200 | 64 | 35.25 | D4 |
| 56M/10/S200 in stock | 56M | 10 | S200 | 64 | 35.25 | D4 |
| 56F/12/S200 in stock | 56F | 12 | S200 | 64 | 35.25 | D4 |
| 58L/6/S200 in stock | 58L | 6 | S200 | 64 | 35 | D4 |
| 58 588/8/S200 In Stock | 58 588 | 8 | S200 | 64 | 35 | D4 |
| 58M/10/S200 in stock | 58M | 10 | S200 | 64 | 35 | D4 |
| 60M/10/S200 in stock | 60M | 10 | S200 | 64 | 35 | D4 |
二木ゴルフ特別価格:15900円
The RTZ wedge, the greatest masterpiece in the history of Cleveland Golf wedges, is born.
After repeated simulations of mixing, melting, and refining, we searched for the best compounding method and completed a new alloy that greatly enhances the performance of golf clubs.
Basic specifications
| head | [Material] Z-ALLOY, [Head Manufacturing Method] Lost-wax precision casting + face laser milling, [Finish] Tour satin finish |
|---|---|
| shaft | NSPRO MODUS3 TOUR 115 steel shaft |
| Shaft Specifications | Weight: 105g, Torque: 1.6, Kick Point: Butt-heavy (S) |
| weight | Club weight: [46°・48°] 453g, [50°・52°] 458g, [54°・56°] 464g, [58°・60°・64°] 466g |
| Content | Grip: Tour Velvet Full Rubber Grip (No backline, Golf Pride logo, 49.5g/60 caliber) |
| Precautions | *Due to the emphasis on spin performance, the ball may get scratched. |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 46M/10/S In Stock | 46M | 10 | S | 64 | 35.75 | D2 |
| 48M/10/S In Stock | 48M | 10 | S | 64 | 35.75 | D2 |
| 50M/10/S in stock | 50M | 10 | S | 64 | 35.5 | D3 |
| 52M/10/S In Stock | 52M | 10 | S | 64 | 35.5 | D3 |
| 54M/10/S In Stock | 54M | 10 | S | 64 | 35.25 | D4 |
| 56M/10/S In Stock | 56M | 10 | S | 64 | 35.25 | D4 |
| 56F/12/S In Stock | 56F | 12 | S | 64 | 35.25 | D4 |
| 58F/12/S In Stock | 58F | 12 | S | 64 | 35 | D4 |
| 58L/6/S In Stock | 58L | 6 | S | 64 | 35 | D4 |
| 58M/10/S In Stock | 58M | 10 | S | 64 | 35 | D4 |
| 60M/10/S in stock | 60M | 10 | S | 64 | 35 | D4 |
二木ゴルフ特別価格:16500円
Going beyond "It's Okay to Duff!", DJ is a brand dedicated to making amateur golfers' game easier and more enjoyable. Since its launch, the DJ series has pursued wedges that allow amateur golfers to "apply spin with their equipment and get the ball closer to the ball." The latest model, the DJ-6, features a new Canyon sole that is more duff-resistant than any previous DJ wedge, created with the desire to help amateur golfers break 100 and improve their best scores. DJ will continue to help amateur golfers improve their game. [DETAIL] ● Grand Canyon Sole (Grand Canyon). Amateurs make two major mistakes: topping the ball or duffing. The DJ-6 features a newly developed G Canyon sole that is more resistant to duffing. After extensive testing, the combination of the bumper sole and the canyon bounce was optimized to create a balanced, synergistic effect between the two sole surfaces. The bumper sole allows the head to dig into the ground, while the canyon bounce firmly grips the ground, pushing the ball forward without letting it sink too deep. It delivers fully automatic forgiveness and ease of use, leaving the club to the driver. ●Optimal Weight Distribution Design. The "W Reverse Taper Blade" and "Theater Blade Structure" combine to optimize the head's weight distribution. Weight is positioned toward the top-toe of the blade and the rear of the sole for enhanced stability at impact. ●Theater Blade Structure. By eliminating the step in the cavity and flowing the face thickness into a theater-like shape, vibrations transmitted to the hand and the center of gravity are controlled. This club achieves both the "feel" and "forgiveness" that golfers desire from a forged soft iron. ●Head Material. This forged head uses S20C (soft iron), one of the softest head materials. It provides golfers with a grippy feel upon impact. ●Precision Forging Process. The back face is precisely forged, the base is polished, and then finished with fine shots, resulting in a scratch-resistant, long-lasting beauty. ●New High-Spin Mirror Forged Face. The new High-Spin Mirror Forged Face further evolves the manufacturing process of the conventional High-Spin Mirror Forged Face, pursuing groove shapes that are just within the legal limits, ensuring stable spin performance even in the rough. This prevents spin performance degradation even in the rough or on rainy days, delivering stable spin performance. ●Original lightweight steel shaft "DS-91w" designed specifically for wedges. This 96g steel shaft was developed specifically for wedges, aiming for "just the right ease of swing" and "ease of use as a club." A classic wedge that reliably hits the green, it is suitable for a wide range of golfers.
Basic specifications
| Head "1" | [Material] S20C mild steel forged (ultra-high precision, mirror forged scoreline face) |
|---|---|
| Head "2" | [Finish] Nickel chrome plating, pearl satin finish |
| shaft | NSPRO DS-91w Steel Shaft |
| Shaft Specifications | Weight: 96g (Wedge) |
| weight | Club weight: Approx. 438g (loft 44, 46, 48), Approx. 442g (loft 50, 52), Approx. 446g (loft 54, 56, 58, 60) |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 44/13/WEDGE in stock | 44 | 13 | WEDGE | 63 | 35.5 | D1 |
| 46/13/WEDGE in stock | 46 | 13 | WEDGE | 63 | 35.5 | D1 |
| 48/13/WEDGE in stock | 48 | 13 | WEDGE | 63 | 35.25 | D1 |
| 50/17/WEDGE in stock | 50 | 17 | WEDGE | 63.5 | 35.25 | D1 |
| 52/17/WEDGE in stock | 52 | 17 | WEDGE | 63.5 | 35.25 | D1 |
| 54/18/WEDGE in stock | 54 | 18 | WEDGE | 64 | 35 | D2 |
| 56/18/WEDGE in stock | 56 | 18 | WEDGE | 64 | 35 | D2 |
| 58/18/WEDGE in stock | 58 | 18 | WEDGE | 64 | 35 | D2 |
| 60/18/WEDGE in stock | 60 | 18 | WEDGE | 64 | 35 | D2 |
二木ゴルフ特別価格:12600円
Are pro model wedges too difficult? There's a wedge for amateurs! The RM-α is a new category of wedge designed for players aiming for a single-shot. ■ Sole shape for amateurs looking to improve. A newly developed sole specifically for the RM-α combines the new universal sole of the DJ-5, designed for ease of use, with the H sole of the RM-4, acclaimed by intermediate and advanced players. A gently sloping bumper on the leading edge helps prevent rough mistakes, and the bounce effect remains consistent whether the face is open or closed, making it easy to hit technical shots. ■ 58° bounce angle options. The 58° sole is available in three different bounce angles: high bounce (H), mid bounce (M), and low bounce (L), all with the same sole shape, to accommodate sand conditions in bunkers, grass conditions around the green, and individual swing angles. The H sole is ideal for those with a deep angle of attack and large turf loads, while the L sole is ideal for those with a gentler angle of attack and less turf loads. ■New reverse taper blade design for improved vertical stability. The back sole connection is narrowed to its limit through the forging process, and the excess weight is efficiently distributed vertically, further improving stability. The new reverse taper blade design delivers stable spin performance even with vertical impact point deviations. ■D-Step blade design for improved lateral stability. The D-Step blade design further evolves the step blade used in the RM-4 Tour Wedge, adding volume to the toe side of the back. This design delivers stable spin performance even with horizontal impact point deviations. ■New high-spin mirror forged face for stable spin performance, even in the rough. The new high-spin mirror forged face further evolves the manufacturing process of the conventional high-spin mirror forged face, pursuing a groove shape that is within the limits of the rules. The revamped TS-114w Ver. 2 delivers consistent spin performance, even in rough conditions or on rainy days. Developed in collaboration with Nippon Shaft Co., Ltd., these wedge-specific shafts offer the perfect balance of ease of swing and ease of use as a wedge, delivering the desired functionality and feel for each club. The 46-54 degree pitching and approach wedge shafts are designed for low lofts, ideal for full-length shots with controlled control. The 56-60 degree sand wedge shafts are designed for high lofts, providing a comfortable feel for both bunker shots and chip shots. Ver. 2 focuses on a feel that makes it easier to place the ball on the face.
Basic specifications
| Head "1" | Material: Forged mild steel (S20C) (New high-spin mirror forged face, D-step blade design) |
|---|---|
| Head "2" | [Finish] Nickel chrome plating, pearl satin finish |
| shaft | NSPRO TS-114w Ver2 Steel Shaft |
| Shaft Specifications | Shaft weight: 125g (WEDGE) |
| weight | Club weight: 46/48/458g, 50/52/54/463g, 56/467g, 58L/58M/58H/60/468g |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 46/7.5/WEDGE in stock | 46 | 7.5 | WEDGE | 63 | 35.5 | D2 |
| 48/7.5/WEDGE in stock | 48 | 7.5 | WEDGE | 63 | 35.5 | D2 |
| 50/8/WEDGE in stock | 50 | 8 | WEDGE | 63.5 | 35.25 | D2.5 |
| 52/8/WEDGE in stock | 52 | 8 | WEDGE | 63.5 | 35.25 | D2.5 |
| 54/11/WEDGE in stock | 54 | 11 | WEDGE | 63.5 | 35.25 | D2.5 |
| 56/12/WEDGE in stock | 56 | 12 | WEDGE | 64 | 35 | D3 |
| 58L/8/WEDGE in stock | 58L | 8 | WEDGE | 64 | 35 | D3.5 |
| 58M/11/WEDGE in stock | 58M | 11 | WEDGE | 64 | 35 | D3.5 |
| 58H/14/WEDGE in stock | 58H | 14 | WEDGE | 64 | 35 | D3.5 |
| 60/10/WEDGE in stock | 60 | 10 | WEDGE | 64 | 35 | D3.5 |
二木ゴルフ特別価格:27500円
The RTZ 2 wedge has evolved even further, offering unwavering control in all situations.
Featuring a refined shape crafted by a master builder, the unique "Z-ALLOY" material, and "ZIPCORE iQ" technology that ensures consistent performance across all lofts, this wedge offers the best balance of forgiveness and control, making it suitable for all wedge shots.
This model conforms to the new groove rules.
Basic specifications
| head | [Material] Z-ALLOY, [Manufacturing Method] Lost-wax precision casting + face laser milling, [Finishing] Tour Satin |
|---|---|
| shaft | NSPRO 950GH neo steel shaft |
| Shaft Specifications | Weight: 92g, Torque: 1.7, Kick Point: Mid-flex (S) *Weight is for the 58° shaft. |
| weight | Club weight: 442g (46°/48°), 446g (50°/52°), 452g (54°/56°), 454g (58°/60°) |
| Content | Grip: Tour Velvet Full Rubber Grip (No backline, Golf Pride logo, 49.5g/60 caliber) |
| Precautions | *Due to the emphasis on spin performance, the ball may get scratched. |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 46M/10/S In Stock | 46M | 10 | S | 64 | 35.75 | D2 |
| 48M/10/S In Stock | 48M | 10 | S | 64 | 35.75 | D2 |
| 50M/10/S in stock | 50M | 10 | S | 64 | 35.5 | D2 |
| 52M/10/S In Stock | 52M | 10 | S | 64 | 35.5 | D2 |
| 54M/10/S In Stock | 54M | 10 | S | 64 | 35.25 | D3 |
| 56 588/8/S In Stock | 56 588 | 8 | S | 64 | 35.25 | D3 |
| 56M/10/S In Stock | 56M | 10 | S | 64 | 35.25 | D3 |
| 56F/12/S In Stock | 56F | 12 | S | 64 | 35.25 | D3 |
| 58 588/8/S In Stock | 58 588 | 8 | S | 64 | 35 | D3 |
| 58F/12/S In Stock | 58F | 12 | S | 64 | 35 | D3 |
| 58L/6/S In Stock | 58L | 6 | S | 64 | 35 | D3 |
| 58M/10/S In Stock | 58M | 10 | S | 64 | 35 | D3 |
| 60 588/8/S In Stock | 60 588 | 8 | S | 64 | 35 | D3 |
| 60M/10/S in stock | 60M | 10 | S | 64 | 35 | D3 |
二木ゴルフ特別価格:30800円
XXIO delivers powerful distance. ■Equipped with the world's first new material, "VR-Titanium." "ULTiFLEX" delivers high trajectory and high initial velocity. ・New cavity structure. By expanding the cavity on the heel side and narrowing the neck, excess weight is created, achieving a low and centered center of gravity. High trajectory and long distance. ・ULTiFLEX. The high-strength "VR-Titanium" significantly thins the toe side of the face, creating excess weight. ・High-density tungsten nickel weight. A high-density tungsten nickel weight has been placed even further below the body than the previous model, achieving a low and centered center of gravity. Achieves even higher trajectory and initial velocity. ■Further improved initial velocity performance: "IRON REBOUND FRAME." The energy of deflection caused by the "L-shaped groove" in the lower body, with its lower rigidity, is absorbed by the rear of the body, creating a large deflection at impact and improving initial velocity performance. - L-shaped groove [soft] that deflects greatly at impact. By positioning it further down than the previous model and reducing rigidity, it amplifies the deflection of the face. - Reduces energy loss [rigid]. The rear part of the body, which has increased rigidity, is an area that firmly absorbs the power of the face, which deflects greatly, without letting it escape. ■An evolved REBOUND FRAME that produces even greater deflection. ■Head shape that provides good grip and a sense of security. A rounded top line shape with a higher heel that gives a sense of security. A slight gooseneck gives the impression of grip. A rounded top blade. A head shape that provides good grip and a sense of security. ■Model that complies with the new groove rules.
Basic specifications
| Head "1" | [Materials/Manufacturing Method] Face: Titanium (Super-TIX 51AF) / CNC machining, Body: SUS630 / Lost-wax casting method |
|---|---|
| Head "2" | [Finish] Mirror + satin + laser finish |
| shaft | XXIO MP1400 carbon shaft |
| Shaft Specifications | Weight: 50/49/48g (#6), Torque: 4.2/4.3/4.3°, Kick Point: Mid-tip (S/SR/R) |
| Content | Grip: XXIO 14 dedicated WEIGHT PLUS full rubber grip (Back line, logo) (47g / caliber 65) |
Product List
| count | flex | Loft (°) | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| Autumn/Winter stock | AW | S | 48 | 63.5 | 36 | D0 |
| AW/SR In Stock | AW | SR | 48 | 63.5 | 36 | D0 |
| AW/R stock | AW | R | 48 | 63.5 | 36 | D0 |
| SW/S stock | SW | S | 56 | 63.5 | 36 | D0 |
| SW/SR In Stock | SW | SR | 56 | 63.5 | 36 | D0 |
| SW/R stock | SW | R | 56 | 63.5 | 36 | D0 |
二木ゴルフ特別価格:27500円
The RTZ 2 wedge has evolved even further, offering unwavering control in all situations.
Featuring a refined shape crafted by a master builder, the unique "Z-ALLOY" material, and "ZIPCORE iQ" technology that ensures consistent performance across all lofts, this wedge offers the best balance of forgiveness and control, making it suitable for all wedge shots.
This model conforms to the new groove rules.
Basic specifications
| head | [Material] Z-ALLOY, [Manufacturing Method] Lost-wax precision casting + face laser milling, [Finishing] Tour Satin |
|---|---|
| shaft | N.S.PRO MODUS3 TOUR115 スチールシャフト |
| Shaft Specifications | 重量:106g、トルク:1.6、キックポイント:手元調子(S)※重量は58°の装着重量です。 |
| weight | クラブ重量:453g(46°・48°)、458g(50°・52°)、464g(54°・56°)、466g(58°・60°) |
| Content | Grip: Tour Velvet Full Rubber Grip (No backline, Golf Pride logo, 49.5g/60 caliber) |
| Precautions | *Due to the emphasis on spin performance, the ball may get scratched. |
Product List
| Loft (°) | Vance | flex | Lie angle (°) | Length (inches) | balance | |
|---|---|---|---|---|---|---|
| 46M/10/S In Stock | 46M | 10 | S | 64 | 35.75 | D2 |
| 48M/10/S In Stock | 48M | 10 | S | 64 | 35.75 | D2 |
| 50M/10/S in stock | 50M | 10 | S | 64 | 35.5 | D3 |
| 52M/10/S In Stock | 52M | 10 | S | 64 | 35.5 | D3 |
| 54M/10/S In Stock | 54M | 10 | S | 64 | 35.25 | D4 |
| 56M/10/S In Stock | 56M | 10 | S | 64 | 35.25 | D4 |
| 56F/12/S In Stock | 56F | 12 | S | 64 | 35.25 | D4 |
| 58F/12/S In Stock | 58F | 12 | S | 64 | 35 | D4 |
| 58L/6/S In Stock | 58L | 6 | S | 64 | 35 | D4 |
| 58M/10/S In Stock | 58M | 10 | S | 64 | 35 | D4 |
| 60M/10/S in stock | 60M | 10 | S | 64 | 35 | D4 |
summary
Wedges are essential clubs for improving your score, so it's important to understand the characteristics of each wedge and how to choose one.
Each wedge – PW, AW, SW, and LW – has a different loft angle and purpose to suit a variety of situations around the green.
When choosing a wedge, it is important to comprehensively consider factors such as the loft angle, which takes into account the difference in distance compared to your iron set, the bounce angle, which determines compatibility with the ground, and the sole shape and grooves. By taking these points into consideration and finding the optimal wedge that suits your golf style, you can improve the accuracy of your approach shots and significantly improve your score.









